Contemporary Executive Office Furniture HG.
DESKS AND MEETING TABLES WITH GLASS TOP REAR-LACQUERED Formed by glass surfaces with a metal structure. The glass surfaces are tempered rear-lacquered of 12mm thick with a shiny rimmed perimeter edge, which can only be used if matched to the metal structure and anchored to the same through supports cast in inox steel. The glass surfaces are available in the following colours: BLACK 10 and EXTRA WHITE 78. The metal structure is a metal tubular framed rectangular section of 50x25 , of 1,5mm thick, treated with METALLIC SILVER coloured epoxy powdered paint.
The desk bases are of folded galvanized sheet iron of 3mm thick appropriately shaped and drilled for the anchoring to the frames and for the positioning of the leveller feet with which they are fi tted. They are decorated in blocks of mdf of semi oval section, covered with paper or pvc in the following colours: HIGH GLOSS WHITE 48 e HIGH GLOSS BLACK 49, fi nished on the heads with abs printed chromed plugs. The interior parts of the legs have room for an inspectional fairlead through a metal carter made of printed plate metal chromed.
The desks with metal structures can be equipped with modesty panels (optional) with MDF type fi breboard panels of 18mm thick covered in a single layer pressed leaf thermoformable PVC in the following colours: NATUR MAT WHITE 15 and NATUR MAT BLACK 16, anchored on the metal legs through metal moulds appropriately shaped and treated with metallic silver coloured epoxy powdered paint.
|Price from||3 855,- EUR|
PEDESTALS AND DESK EXTENSIONS They're available with shaped fi nish top + fi nal side panels appropriately anterior shaped and coupled with 45? cut. The inside structure are made of melamine bloomed particleboard panels of 18mm thick perimetrically fi nished with a melamine edge of 0.4mm thick in the same colour as the surface. The glass frontals are tempered rear-lacquered of 4mm thick, are available in the following colours: BLACK 10 and EXTRA WHITE 78. They are perimetrically finished with a aluminium frame. Opening without handle, with mechanism push-open. The back, the top and fi nal side panels are made with MDF type fi breboard panels of 18mm thick with bloomed internal sides, with the outer sides covered in a single layer pressed leaf thermoformable PVC in the following colours: NATUR MAT WHITE 15 and NATUR MAT BLACK 16. The drawers internal structure has small side fi breboard panels and base covered in black PVC that slides on metal guides with nylon bearings fi tted with runners for opening and self-closing in the lockup. The structure rests on a pirouette moving wheel made of nylon.
LOW, MEDIUM AND HIGH CABINETS: Structure consists of: base, upper panel, two side panels and back (of 18mm thick inserted into milled). Structure made of 18 mm thick particleboards faced with melamine, available in colours : ANTHRACITE 56 and BR. WHITE 69, edge in 0.4 mm melamine. Height-adjustable feet in black nylon fi xed under the base (4 pieces), with adjustment range of 15 mm. The shelves are made of 25 mm thick particleboards faced with melamine, available in colours : ANTHRACITE 56 and BR. WHITE 69. The edge surround is made of 2 mm ABS to match the surface. They are equipped with concealed hardware and can be fi xed at height pitch of 32mm. The glass doors and the glass frontals (5 drawer furniture) are tempered rear-lacquered of 4mm thick, are available in the following colours: BLACK 10 and EXTRA WHITE 78. They are perimetrically fi nished with a aluminium frame. Opening without handle, with mechanism push-open. The cabinets are always completed with top fi nish or top fi nish + fi nal sides appropriately anterior shaped and coupled with a 45° cut.
FINISHING TOPS AND FINAL SIDE PANELS The tops are made with MDF type fibreboard panels of 18mm thick with a bloomed internal sides with the visible parts covered in a single layer pressed leaf thermoformable PVC in the following colours: NATUR MAT WHITE 15 and NATUR MAT BLACK 16.
PACKAGING All the components are disassembled and packed when supplied, and have paper triple type folding packaging, fi llets for the perimetrical protection and for the fi llings up, where needed . The corners are protected, where needed, through shock resistant edges protector. The packing closure occurs through sticky tape and welded nylon strap. Pedestals are assembled, when supplied, protected through polystyrene angle bars on the sides and packed using thermo-retractable polyethylene leave when provided.